+
♦This machine is a smart sawing processing center that integrates drilling, grooving, cutting, corner protection, light scribing, and label printing. It is equipped with 13 axes, 3 sets of special cutting methods, 5 sets of drilling devices on four sides, front and rear laser scribing devices, automatic label printing device, and waste collection device. Automatic recycling. Equipped with dual monitoring, it is safer to observe through the screen.
♦The whole is welded with thickened square tube. After welding, it is sanded and shot blasted. Internal stress is eliminated, and the gantry is processed and formed at one time. The precision is higher.
♦The base of the chassis and the main components are all cast and integrated. They are cut and drilled by CNC machining centers. They are not easily deformed and more stable.
♦The main components and systems are all of well-known brands, ensuring the data processing and durability of the long-term operation of the equipment.
♦Industrial appearance sheet metal design. Fully wrapped chassis, beautiful and safe.
♦Docking with mainstream door and window software, processing can be done after transmission.
♦Maichen CNC-committed to creating stable, efficient and professional high-end door and window intelligent equipment.
♦Let innovation drive development and empower production with technology Provide smart production solutions for digital factories.
Overall dimensions (L * W * H) | 14750mm × 3500mm × 2800mm (excluding chip conveyor size) |
Chip conveyor size (L* W* H) | 3150mm × 500mm x 700mm |
Total weight | About 8 tons |
Input power | 380V/50HZ Three-phase four-wire system |
Operating air pressure | 0.6-0.8MPA |
Blade speeds | 15-50m/min |
Servo running speed | 40-80m/min |
Blank length | 56350mm |
Cutting length | ≥300 |
Allowed loading quantity of loading table | 8+1 circular |
Blade diameter | Ф550 |
Cutting angle | 45°, -45°, 90° Can be cut in any combination |
Sawing mode | 2 bottom outlets, 1 horizontal push |
Profile processing range | 40-120mm |
Drilling method | Two back out, one up and one down. a front out |
Laser scribing mode | front-to-back approximation |
